 |
Brake Discs Introduction
|
Standard replacement and
performance upgrade brake discs
ISR brake discs are suitable
for all uses, whether it be normal road use, or full
race conditions. Whatever you want, from standard replacement
discs to oversized discs or discs of your own specification,
we can provide it. We have a full range of solid, non
floating and semi and full floating discs for front
or rear brakes, with diameters ranging from 200 to 400mm.
ISR are unique in offering a completely
customisable service, making brakes to whatever size,
offset or bolt pattern you can dream up. Click
here for more information.
1. The rotor is drilled to allow heat to dissipate
and gas and brake dust to escape. Easily replaceable
if it cracks or warps or just wears out.
2. The carrier is specifically designed to
match the offset and bolt pattern for all makes and
models Changing wheels only requires the carrier to
be changed to continue using the discs and other brake
kit.
3. No special tools are needed to undo the
buttons to replace the rotor.
Please remember...
The ISR discs can be rebuilt. Click
here for details of the DIY rebuild kits that we
sell.
When replacing your brake discs
we recommend that you replace your brake
pads so that you get the full benefit of the new
discs. It also wouldn't do any harm to replace the brake
fluid, especially if you are upgrading the discs, because
higher performance brakes need higher performance brake
fluid to get the best out of the system.
 top
|
